· Side processing for diamond saw blade.
· Can use copper or graphite electrodes, automatic turning, automatic compensation.
· Using traditional hard alloy saw blade grinding platform combined with EDM technology, it is more professional, more accurate, more efficient, and easier to adjust than the tool platform.
· Menu-type product management design, just enter the product parameters into the menu system, the machine automatically adjusts the relevant parameters, and once entered, long-term storage, that is, call and work.
· Active fire identification and emergency handling system to ensure more safety.
· Independent research and development of EDM system, multi-level grading processing, can choose different discharge levels according to different customer types, in order to achieve the best choice of surface smoothness and efficiency of sawtooth.
· Coarse finish grinding is done at one time, no separate finishing is required.
| Electrical Information | |||
| Project | Parameter | Project | Parameter |
| Voltage | Three-phase five-wire system （380V+220V） | Total power | 3KW |
| Rated power | 1.5KW | Discharge power | 500W |
| Air pressure | 0.5±0.1MPa | Dehumidification required | |
| Processing Capacity | |||
| Project | Parameter | Project | Parameter |
| Processing efficiency | About 2-4 minutes / tooth | Diameter range | 100—750mm |
| Tooth pitch range | ≤65mm | Tooth width range | ≤15mm |
| Front angle range | -5°— 20° | Side angle | -20°— +20° |
| Roll angle | 0~10° | Blade thickness accuracy | ≤0.02mm |
| Tooth side height difference | 0.02mm | Tooth end jump | About substrate runout plus 0.02mm |
| Machine Iinformation | |||
| Dimensions | 1.75*1.2*2.0m | Weight | 1.6T |
| Common Consumables | |||
| EDM liquid, electrode, conductive needle for electrode, filter, PCD double-ended knife | |||
