· Used for machining the side and top of diamond saw blade.
· Can use copper or graphite electrodes, automatic turning, automatic compensation.
· Using traditional hard alloy saw blade grinding platform combined with EDM technology, it is more professional, more accurate, more efficient, and easier to adjust than the tool platform.
· Menu-based product management design, just enter product parameters into the menu system, mechanically adjust related parameters automatically, and enter them once, save for a long time, and call and work
· Active fire identification and emergency handling system to ensure more safety.
· Independent research and development of EDM system, multi-level grading processing, can choose different discharge levels according to different customer types, in order to achieve the best choice of surface smoothness and efficiency of sawtooth.
· Coarse finish grinding is done at one time, no separate finishing is required.
· Combination of various complex tooth shapes, such as ladder teeth, sharp teeth, chamfered teeth, can be completed at one time.
Electrical Information | |||
Project | Parameter | Project | Parameter |
Voltage | Three-phase five-wire system (380V+220V) | Total power | 3KW |
Air pressure | 0.5±0.1MPa | Rated power | 1.5KW |
Dehumidification required | |||
Processing Capacity | |||
Project | Parameter | Project | Parameter |
Processing efficiency | About 2-4 minutes / tooth | Diameter range | 100—600mm |
Tooth pitch range | ≤40mm | Tooth width range | ≤15mm |
Front angle range | -5°— 20° | Centripetal angle | -20°— +20° |
Perimeter angle | 0~10° | Tooth side height difference | 0.03mm |
Back angle range | 8°— 20° | Rake angle | -45°— +45° |
Runout accuracy | ≤0.03mm | Discharge medium | Standard EDM Fluid |
Machine Information | |||
Dimensions | 1.4*1.6*2.0m | Weight | 1.5T |
Common Consumables | |||
EDM liquid, electrode, conductive needle for electrode, filter, PCD double-ended knife |